remove pcv valve

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

remove pcv valve #863878 01/25/08 08:45 PM

Joined: Nov 2007

Posts: 60

Afton WY

wyodriver4 Offline

Getting the Wheeling Fever

how do you take the pcv valve off? mine seems like its press fitted or something. accidently broke trying to get it out.

cone filter, boche platinum 4 plugs, 235/75/15 kumho all terrains jeep tj rear springs and rav 4 rear shocks, rocksport gear 4" front springs, warn manual hubs, 2.25 inch exhaust, no cat, 48" thrush glasspack

Entire Thread
Subject	Posted By	Posted
remove pcv valve	wyodriver4	01/25/08 08:45 PM
Re: remove pcv valve	bumpcity76	01/25/08 09:07 PM
Re: remove pcv valve	wyodriver4	01/26/08 02:14 AM

Moderated by 4x4Wire, Axe Man, DamKia

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.586s Queries: 15 (3.585s) Memory: 0.5958 MB (Peak: 0.6288 MB) Data Comp: Off Server Time: 2026-06-12 00:16:27 UTC
Valid HTML 5 and Valid CSS