Stopping the engine

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Stopping the engine [Re: 2002trooper4me] #863951 01/27/08 07:48 AM

Joined: Jan 2003

Posts: 279

Chino, CA

FSJ1978

Mudrunner

Not to muddy the waters but I seem to recall seeing posts about the 2.6L (if that's the engine in your truck) having the ballancer 'slipping' so the timing marks aren't right.

Chris Enos (Chino, CA)

'91 Isuzu Amigo "Rover" (Camaro 3800 swap in progress / 2.25" exhaust)
....(SOA / Custom rear bumper / CB / HAM)

Entire Thread
Subject	Posted By	Posted
Stopping the engine	Littlewhitepup	01/26/08 01:20 AM
Re: Stopping the engine	Jim_Paget	01/26/08 03:48 PM
Re: Stopping the engine	Littlewhitepup	01/27/08 01:27 AM
Re: Stopping the engine	2002trooper4me	01/27/08 07:44 AM
Re: Stopping the engine	FSJ1978	01/27/08 07:48 AM
Re: Stopping the engine	Littlewhitepup	01/28/08 01:46 PM
Re: Stopping the engine	acy76	01/30/08 04:55 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.522s Queries: 16 (3.519s) Memory: 0.6041 MB (Peak: 0.6371 MB) Data Comp: Off Server Time: 2026-06-03 08:15:34 UTC
Valid HTML 5 and Valid CSS