[quote]It fits perfect just in the front most hole in the lower intake. If you have a Temp guage, I don't think this location will work though because it is already being used.
[Linked Image]


To fit it in with an existing temp gauge, all you need is a
T-fitting that will screw in to the existing hole.
Then put your switch in on one side and the temp gauge on the other.

1995 Trooper LS auto 3.2 DOHC /w SOHC intake
1989 Trooper 2.6 auto
1989 I-Mark RS DOHC 1.6
1991 Stylus XS DOHC 1.8