Quote
hey guys ........got major issues with transfer case.......any chance anyone would have or be able to get hold of diagrams or drawings of the transfer case and gear layout ........any help would be graetly appreciated......
heres what it is doin.......when you back of in 4wd only .......the drivetrain bangs......and binds up......have spent a ***** load of dollars rebiuldin the front end with new cvs(have allready broken 1shaft and siezed another cv)...and my avm hubs were knackered so i replaced them as well......but it is still bloody there ........2wd its ok........just when drive is put to the front hey....... <img src="/forums/images/graemlins/scared.gif" alt="" /> <img src="/forums/images/graemlins/scared.gif" alt="" />

Cheers Adam


hate to tell you, but EVERY TIME i have had the same noise, i thought it was the transfer case and it's been the front hubs, one or both are broken, but still not able to be turned by hand when locked and didn't just fall apart, either. i had to put a new hub on to find out the problem was the hub.

only one person on this board has ever had a chain come apart and it was after someone did some maintenance or something and what happened was one of the pins in the chain came loose and the chain slowly came undone.

i'd make sure it's not a hub, CV, front driveshaft u-joint, etc. before i went to the hassle of taking the t-case down and cracking it open.

95 Sportage w/welded and 5.89 geared dana 44's on 38.5" TSL's.- SADLY SOLD
CURRENTLY - 2000 sportage, 5.38 gears, welded diffs, 35" tires, 5.5" lift

http://www.cardomain.com/ride/341410