3.2L replaced main fusable link but still won't start?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3.2L replaced main fusable link but still won't start? [Re: RobG] #864432 02/09/08 08:14 PM

Joined: Sep 2000

Posts: 4,277

Winston-Salem, NC, USA

RobG

Roll Me Over

after chatting with Jerry, I'm off to see if I can find a replacement ignition control module. I'll report back if this does the trick.

Thanks Jerry!

-Rob

Entire Thread
Subject	Posted By	Posted
3.2L replaced main fusable link but still won't start?	RobG	01/28/08 01:47 AM
Re: 3.2L replaced main fusable link but still won't start?	RobG	02/09/08 06:52 PM
Re: 3.2L replaced main fusable link but still won't start?	RobG	02/09/08 08:14 PM
Re: 3.2L replaced main fusable link but still won't start?	BigSwede	02/10/08 01:12 AM
Re: 3.2L replaced main fusable link but still won't start?	RobG	02/10/08 07:21 PM
Re: 3.2L replaced main fusable link but still won't start?	Hello	02/11/08 03:08 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.822s Queries: 16 (3.820s) Memory: 0.6023 MB (Peak: 0.6353 MB) Data Comp: Off Server Time: 2026-06-14 00:10:12 UTC
Valid HTML 5 and Valid CSS