Quote
Quote
I can use any frame from '92 to '99 right?

I expect that would be true, I do not have CAPs on this computer so I can not tell for sure.
For doing the clip I would leave the front attached in its original mounting allowing for easier alignment of the new rear section. Well unless you really want to lift it but for 33s I would just do suspension lift if you wanted it up higher.


This may be what you said <img src="/forums/images/graemlins/smile.gif" alt="" /> but I planned on doing to whole job on the truck. I thought about using the rear body mounts to align the rear frame clip to the rest of the frame. Is that what you mean Charlie?

'97 Montero 'LSR' - 4.6 gears & factory rear locker, 33" Procomp muds on 15x8 steelies, 50mm coil spacers, T-bar crank, Airlift, sans rear sway, 50mm rear frame & fuel tank lift, Aisins, ARB front bumper + 10k lb winch, 50mm DIY body lift, rock sliders, cut rear quarter panels...