4D56 head on 4D55???

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 4D56 head on 4D55??? [Re: david85] #864703 01/29/08 05:30 AM

Joined: Jan 2005

Posts: 1,538

Red Deer, Alberta

torquemonster Offline

Body Damage is Cool

from what I have read the head does work and is much more efficient...they flow alot better than the 2.3 heads....I am not sure what it does for compression though. do some reading on POCUK and you should find your answer there.

Entire Thread
Subject	Posted By	Posted
4D56 head on 4D55???	david85	01/28/08 10:29 PM
Re: 4D56 head on 4D55???	torquemonster	01/29/08 05:30 AM
Re: 4D56 head on 4D55???	david85	01/29/08 09:12 PM
Re: 4D56 head on 4D55???	yorkie55	01/31/08 11:19 PM
Re: 4D56 head on 4D55???	david85	02/01/08 12:50 AM
Re: 4D56 head on 4D55???	yorkie55	02/01/08 12:03 PM
Re: 4D56 head on 4D55???	david85	02/01/08 11:01 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.832s Queries: 16 (3.830s) Memory: 0.6042 MB (Peak: 0.6372 MB) Data Comp: Off Server Time: 2026-06-12 11:45:21 UTC
Valid HTML 5 and Valid CSS