Manual Locking Hubs

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Manual Locking Hubs [Re: jaybur] #866317 02/04/08 09:00 PM

Joined: Dec 2007

Posts: 316

Michigan

homerdog

Mudrunner

I cut the center of the hub caps out with a Dremel. You're either going to have to do that to access the locking hubs or run without hub caps.

2001 Sportage, TJ 106's, Everet spacers and bumpstops, Bilstein shocks on the rear, cone filter, Crager wheels, 235-75-15 Goodyear tires. Custom front winch bumper by Dave Scott. Currently DOA, but it is a work in progress.
2011 Kia Forte EX

Entire Thread
Subject	Posted By	Posted
Manual Locking Hubs	scott473	02/03/08 06:16 PM
Re: Manual Locking Hubs	jaybur	02/03/08 06:42 PM
Re: Manual Locking Hubs	homerdog	02/04/08 09:00 PM

Moderated by 4x4Wire, Axe Man, DamKia

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.512s Queries: 16 (3.510s) Memory: 0.5962 MB (Peak: 0.6292 MB) Data Comp: Off Server Time: 2026-06-14 22:16:54 UTC
Valid HTML 5 and Valid CSS