Front shackle clearance

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Front shackle clearance #866372 02/03/08 11:28 PM

Joined: Sep 2006

Posts: 90

Sonora,Ca, Usa

Locked_Solid_Toy Offline

Getting the Wheeling Fever

I was lookin at my front shackles on my yota. They are 5.5" long marlins. But i was looking and it seems that when i flex out the front the shackles hit the body mount for the cab, what can i do to get around this, get more clearence, any ideas?
-Thanks

1985 yota 22RJasper motor w/ cam,webber carb.Marlin histeer & 4"springs, AllPro jonny jointshackles. Bds yj springs upfront. Bilstein 5150's all around. 4.88 yukon gears,detroit locker and truetrac. Fj80 Master cylinder, 33" MTR's

Entire Thread
Subject	Posted By	Posted
Front shackle clearance	Locked_Solid_Toy	02/03/08 11:28 PM
Re: Front shackle clearance	Adam F	02/04/08 12:12 AM
Re: Front shackle clearance	toyotaguy55	02/04/08 12:09 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 8.529s Queries: 15 (3.443s) Memory: 0.5964 MB (Peak: 0.6293 MB) Data Comp: Off Server Time: 2026-05-29 20:08:07 UTC
Valid HTML 5 and Valid CSS