Hey 3.4Runner,

I'm glad you chimed in, but disappointed at the same time <img border="0" title="" alt="[Smile]" src="images/icons/smile.gif" /> Oh well, it's better I found out now than later. I haven't given up though. I just went and ordered all the parts I listed, PLUS just about every harness in the back that wasn't obviously unrelated to the locker. One of those have to be the missing link. I'm tired of futzing around and playing guessing games. I do have one question for you though... How did you determine that that switch behind the dash wasn't for the RR DIFF LOCK switch? If you look at this diagram that Dandeman sent me of the RR DIFF LOCK switch, you can see that pins 1 and 4 get shorted when the locker switch is pushed in:

<img src="http://www.phorunner.com/temp/switch.jpg" alt="" />

So I compared that to the connector in the dash, and sure enough, only pins 1 and 4 of the connector have wires to them. There are two other connectors back there that are hanging back there, but their connectors don't match with the switch's. Is it possible you mistook one of those for the RR DIFF LOCK switch connector? I'm just searching for an explanation here. That, and it doesn't seem likely to me that Toyota would place an identical connection for something other than the locker switch, right where the locker switch goes...

Thanks alot.

-phong