Bolt Size

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Bolt Size [Re: Littlewhitepup] #867132 02/05/08 05:39 AM

Joined: Oct 2001

Posts: 4,016

Lafayette, IN

strawmyers Offline

Isuzu Moderator

Assuming the 10-bolt rear is the same as its front-end counterpart, you don't want to go just haphazardly messing with that. The pinion preload is set with a crush sleeve and you'll need a new one and the ability to correctly install it if you take down that part of the axle. IIRC

Sean Strawmyer
Back and ready to rock...... crawl.

From Indiana or surrounding states and interested in wheelin'? Check out www.mwior.com

Entire Thread
Subject	Posted By	Posted
Bolt Size	Littlewhitepup	02/05/08 04:48 AM
Re: Bolt Size	strawmyers	02/05/08 05:39 AM
Re: Bolt Size	Littlewhitepup	02/07/08 05:11 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.522s Queries: 16 (3.520s) Memory: 0.5971 MB (Peak: 0.6301 MB) Data Comp: Off Server Time: 2026-06-06 11:45:11 UTC
Valid HTML 5 and Valid CSS