Bolt Size

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Bolt Size [Re: strawmyers] #867133 02/07/08 05:11 AM

Joined: Jun 2007

Posts: 60

Littlewhitepup Offline

Getting the Wheeling Fever

Oh, I was told by the isuzu dealer ship that is isn't that hard. They said I could use the same crush washer I just need to only tighten it to 70ft lbs. How should I get the leak fixed then? Do I need to have tehm do it?

Entire Thread
Subject	Posted By	Posted
Bolt Size	Littlewhitepup	02/05/08 04:48 AM
Re: Bolt Size	strawmyers	02/05/08 05:39 AM
Re: Bolt Size	Littlewhitepup	02/07/08 05:11 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.632s Queries: 16 (3.629s) Memory: 0.5948 MB (Peak: 0.6278 MB) Data Comp: Off Server Time: 2026-06-05 04:33:59 UTC
Valid HTML 5 and Valid CSS