Changing timing chain and gears, a little confused

Print Thread

Rate Thread

Re: Changing timing chain and gears, a little confused [Re: damitboy] #868506 02/12/08 08:53 AM

Joined: Nov 2007

Posts: 10

kerby2

Need a Spot

For the puller for the vibration damper check to see if you have a local Harbor Freight tools in your area. You can get the set for less than $10.00. I just did my first and it was a breeze.

p.s.Don't forget to replace the oil slinger. I have found in the past if you take a pic or two prior to teardown it will help with the memory when putting everything back together again.

have fun with it, don't stress,

kerby2

Entire Thread
Subject	Posted By	Posted
Changing timing chain and gears, a little confused	damitboy	02/12/08 02:36 AM
Re: Changing timing chain and gears, a little confused	BigJim	02/12/08 03:05 AM
Re: Changing timing chain and gears, a little confused	damitboy	02/12/08 04:24 AM
Re: Changing timing chain and gears, a little confused	BigJim	02/12/08 05:04 AM
Re: Changing timing chain and gears, a little confused	kerby2	02/12/08 08:53 AM
Re: Changing timing chain and gears, a little confused	damitboy	02/12/08 02:42 PM
Re: Changing timing chain and gears, a little confused	KiwiCowboy	02/15/08 01:14 AM
Re: Changing timing chain and gears, a little confused	Macka	02/15/08 05:11 PM
Re: Changing timing chain and gears, a little confused	kerby2	02/21/08 07:50 AM
Re: Changing timing chain and gears, a little confused	damitboy	02/16/08 02:00 PM
Re: Changing timing chain and gears, a little confused	KiwiCowboy	02/17/08 05:10 AM
Re: Changing timing chain and gears, a little confused	damitboy	02/17/08 06:04 AM
Re: Changing timing chain and gears, a little confused	damitboy	02/17/08 06:04 AM
Re: Changing timing chain and gears, a little confused	KiwiCowboy	02/18/08 04:26 AM
Re: Changing timing chain and gears, a little confused	damitboy	02/18/08 02:55 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social: