Roll Bar

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Roll Bar [Re: Yote] #868836 02/13/08 02:54 AM

Joined: Apr 2002

Posts: 3,568

Grass Valley, CA

Snowtoy

Roll Me Over

Yes, both the 1st and 2nd gen X-cabs(4x4 models), have the same size bed(6'), w/the 2nd gens being a little wider.

More than tread lightly. Leave it like you were never there, nor anyone else.
'90 X-cab 4.88's 33 BFG AT's, rr ARB, Headers, Ignition upgrade, cold air induction.
'91 X-cab 5.29's 315's BFG MT's, rr ARB, custom bumper and flatbed

Entire Thread
Subject	Posted By	Posted
Roll Bar	Yote	02/13/08 01:35 AM
Re: Roll Bar	Elbow_Greese	02/13/08 02:48 AM
Re: Roll Bar	Snowtoy	02/13/08 02:54 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.573s Queries: 16 (3.570s) Memory: 0.5941 MB (Peak: 0.6271 MB) Data Comp: Off Server Time: 2026-06-15 11:01:17 UTC
Valid HTML 5 and Valid CSS