Oil pan torque.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Oil pan torque. #868846 02/13/08 03:32 AM

Joined: Jun 2007

Posts: 60

Littlewhitepup Offline

Getting the Wheeling Fever

I have a 92 2.3 pickup with the 4ZD1 motor and I can't find the torque spec for the oil pan. I have seen things saying 13ft lbs but that is too much for it. I also seen things saying this motor is diff. than the other specs. Anyone know the correct spec?
Thanks

Entire Thread
Subject	Posted By	Posted
Oil pan torque.	Littlewhitepup	02/13/08 03:32 AM
Re: Oil pan torque.	lttlbddy	02/13/08 07:36 AM
Re: Oil pan torque.	Littlewhitepup	02/14/08 02:15 AM
Re: Oil pan torque.	HCMP	02/14/08 06:19 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.470s Queries: 15 (3.468s) Memory: 0.5985 MB (Peak: 0.6315 MB) Data Comp: Off Server Time: 2026-06-06 15:16:50 UTC
Valid HTML 5 and Valid CSS