Main/rod bearing advice

Print Thread

Rate Thread

Re: Main/rod bearing advice [Re: waterwrat] #869101 02/19/08 06:03 PM

Joined: Jul 2006

Posts: 31

waterwrat

Getting the Wheeling Fever

I found a couple of threads that you'd explained the "slip plate"/steel backing, so that helps a bit. Well, maybe more so next time I have to remove/install the head.....I already bought a Fel-Pro (Fed-Mog?). But, I still can't find the procedure...or anything more about the studs. Except that you'd recommended a performance gasket for the performance studs.

Entire Thread
Subject	Posted By	Posted
Main/rod bearing advice	waterwrat	02/14/08 02:51 AM
Re: Main/rod bearing advice	Vanishing_Point	02/14/08 05:11 AM
Re: Main/rod bearing advice	waterwrat	02/14/08 05:53 AM
Re: Main/rod bearing advice	engnbldr	02/14/08 06:29 AM
Re: Main/rod bearing advice	Vanishing_Point	02/14/08 07:01 AM
Re: Main/rod bearing advice	waterwrat	02/14/08 04:36 PM
Re: Main/rod bearing advice	dcg9381	02/14/08 08:53 PM
Re: Main/rod bearing advice	waterwrat	02/15/08 10:26 AM
Re: Main/rod bearing advice	engnbldr	02/16/08 07:37 PM
Re: Main/rod bearing advice	wsquaredodie	02/17/08 02:01 AM
Re: Main/rod bearing advice	engnbldr	02/17/08 02:09 AM
Re: Main/rod bearing advice	waterwrat	02/19/08 05:45 PM
Re: Main/rod bearing advice	waterwrat	02/19/08 06:03 PM
Re: Main/rod bearing advice	waterwrat	02/23/08 03:31 AM
Re: Main/rod bearing advice	kewlynx	02/23/08 08:22 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: