cant read codes ????

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: cant read codes ???? [Re: Dandeman] #869205 02/24/08 06:26 PM

Joined: Jan 2006

Posts: 21

weel

Need a Spot

Found a blown fuse. in the fuse box. i guess the power sigal goes thru there. now its pulling codes. misfire on cylinder 4 generic. i guess i need to check the plug wire and then the coil resistance will be next..

Entire Thread
Subject	Posted By	Posted
cant read codes ????	weel	02/14/08 03:41 PM
Re: cant read codes ????	foxtrapper	02/14/08 03:51 PM
Re: cant read codes ????	weel	02/14/08 04:14 PM
Re: cant read codes ????	eleet	02/14/08 04:16 PM
Re: cant read codes ????	ErikB	02/14/08 04:33 PM
Re: cant read codes ????	Dandeman	02/15/08 12:36 AM
Re: cant read codes ????	weel	02/15/08 01:56 AM
Re: cant read codes ????	eleet	02/15/08 03:00 AM
Re: cant read codes ????	CJMT100	02/15/08 07:05 AM
Re: cant read codes ????	weel	02/15/08 08:47 AM
Re: cant read codes ????	eleet	02/15/08 02:42 PM
Re: cant read codes ????	Dandeman	02/15/08 07:25 PM
Re: cant read codes ????	weel	02/24/08 06:26 PM
Re: cant read codes ????	BamZipPow	02/24/08 07:43 PM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.389s Queries: 16 (3.387s) Memory: 0.6202 MB (Peak: 0.6532 MB) Data Comp: Off Server Time: 2026-05-27 01:36:59 UTC
Valid HTML 5 and Valid CSS