Interesting 180 degree tubing bender project

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Interesting 180 degree tubing bender project #869362 02/15/08 02:28 AM

Joined: Oct 2007

Posts: 409

The Village

Bogo

Mudrunner

180 degree tube bender project has allot of good details and photos.

http://www.offroadfabnet.com/forums/showthread.php?t=218

-- Bryan

Entire Thread
Subject	Posted By	Posted
Interesting 180 degree tubing bender project	Bogo	02/15/08 02:28 AM
Re: Interesting 180 degree tubing bender project	Adam F	02/20/08 08:52 AM

Moderated by 4x4Wire, PHIL_

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.530s Queries: 15 (3.528s) Memory: 0.5939 MB (Peak: 0.6269 MB) Data Comp: Off Server Time: 2026-06-23 15:11:36 UTC
Valid HTML 5 and Valid CSS