can i put a 2.3 head on a 2.6 block?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

can i put a 2.3 head on a 2.6 block? #869404 02/15/08 05:33 AM

Joined: Sep 2004

Posts: 20

western iowa

jamesn

Need a Spot

hi. i have been looking for a good aftermarket head. no longer. i have a cracked block instead. i have priced short blocks and the 2.3 and the 2.6 are about the same price. can i use a 2.3 head on a 2.6 block? i could use the displacement.

Entire Thread
Subject	Posted By	Posted
can i put a 2.3 head on a 2.6 block?	jamesn	02/15/08 05:33 AM
Re: can i put a 2.3 head on a 2.6 block?	strawmyers	02/15/08 12:10 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.514s Queries: 15 (3.512s) Memory: 0.5941 MB (Peak: 0.6271 MB) Data Comp: Off Server Time: 2026-06-08 09:28:39 UTC
Valid HTML 5 and Valid CSS