obd2 question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: obd2 question [Re: OldColt] #869476 02/15/08 09:17 PM

Joined: Mar 2003

Posts: 54

Rockwall, Texas

montyjo

Getting the Wheeling Fever

Thanks for the replies. If the ECU is the same as a 96, then shouldn't I be able to read the error code with a OBDII scanner? And where is the plug located?

1995 Montero SR
SuperWinch Hubs, 31x10.5 BFG A/T'S

Entire Thread
Subject	Posted By	Posted
obd2 question	montyjo	02/15/08 07:57 PM
Re: obd2 question	off-roader	02/15/08 08:06 PM
Re: obd2 question	OldColt	02/15/08 09:01 PM
Re: obd2 question	montyjo	02/15/08 09:17 PM
Re: obd2 question	conner	02/17/08 02:51 PM
Re: obd2 question	OldColt	02/17/08 10:05 PM
Re: obd2 question	montyjo	02/18/08 01:36 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.473s Queries: 16 (3.471s) Memory: 0.6055 MB (Peak: 0.6385 MB) Data Comp: Off Server Time: 2026-06-19 05:33:35 UTC
Valid HTML 5 and Valid CSS