|
|
|
|
 Rocker arm shafts thrashed
#869805
02/17/08 08:48 PM
|
Joined: Mar 2007
Posts: 60
OP
Getting the Wheeling Fever
|
Hey Guys,
I picked up a new set of rocker arms and adj. screws but I just finished pulling apart the rocker arm assembly and the shafts are wasted. Grooves, heavily worn, etc. What is the best place to pick up a new set of shafts? Napa online has 2 kinds listed - one for about $40 each and the other closer to $50 each.
Engine Builder doesn't have them listed on the site so maybe someone can chime in on whether they sell the shafts or not?
Thanks.
|
|
 Re: Rocker arm shafts thrashed
[Re: Bolosh]
#869806
02/18/08 01:29 AM
|
Joined: Sep 2003
Posts: 1,686
Body Damage is Cool
|
I've used these in my truck for 25K miles so far, looking good. My old ones were rubbed through on the bottom. I think it was too tight of valve lash, and too thick of oil from the previous owner. web page
85 4Runner - With NEW Marlin 4.7 Gears!! It's a whole new beast!
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.011s Queries: 15 (0.009s) Memory: 0.5860 MB (Peak: 0.6338 MB) Data Comp: Off Server Time: 2026-07-16 09:56:14 UTCValid HTML 5 and Valid CSS 
