Rocker arm shafts thrashed

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rocker arm shafts thrashed [Re: Bolosh] #869806 02/18/08 01:29 AM

Joined: Sep 2003

Posts: 1,686

Phoenix, Az

Staceman

Body Damage is Cool

I've used these in my truck for 25K miles so far, looking good. My old ones were rubbed through on the bottom. I think it was too tight of valve lash, and too thick of oil from the previous owner.

web page

85 4Runner - With NEW Marlin 4.7 Gears!! It's a whole new beast!

Entire Thread
Subject	Posted By	Posted
Rocker arm shafts thrashed	Bolosh	02/17/08 08:48 PM
Re: Rocker arm shafts thrashed	Staceman	02/18/08 01:29 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.662s Queries: 16 (3.660s) Memory: 0.5942 MB (Peak: 0.6272 MB) Data Comp: Off Server Time: 2026-07-16 11:46:02 UTC
Valid HTML 5 and Valid CSS