when i conect battery posts engie wants to start no key in?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Register Log In 4x4Wire TrailTalk Forums Mitsubishi 4x4 and SUV Tech when i conect battery posts engie wants to start no key in?

Print Thread

Rate Thread

Re: when i conect battery posts engie wants to start no key in? [Re: blackmage] #870345 02/20/08 01:15 AM

Joined: Feb 2005

Posts: 7,458

Montero Ranch

rxinhed

Trail Leader

You obviously are experiencing the symptoms of a high-tension draw. I'd look into the possibility of the starter switch on the steering column not following the same synch as the ignition key.

1987 Raider - Roxy
1988 Mighty Max 2.6L Turbo - Pearl
1997 Mountaineer V8 - Freddy
2000 Excursion V10 - Freya

Entire Thread
Subject	Posted By	Posted
when i conect battery posts engie wants to start no key in?	blackmage	02/20/08 12:33 AM
Re: when i conect battery posts engie wants to start no key in?	rxinhed	02/20/08 01:15 AM
Re: when i conect battery posts engie wants to start no key in?	blackmage	02/20/08 01:17 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.488s Queries: 16 (3.486s) Memory: 0.5977 MB (Peak: 0.6307 MB) Data Comp: Off Server Time: 2026-06-18 10:07:46 UTC
Valid HTML 5 and Valid CSS