|
|
|
|
 tranny swap
#870644
02/22/08 01:44 AM
|
Joined: Apr 2007
Posts: 76
OP
Getting the Wheeling Fever
|
89 ext 4x4 pickup 22re w56 140k
My w56 transmission started making some rattling noises on occassion, definately coming from inside the transmission housing. Oil level is full. Came across a pretty good deal for a transmission out of a 93 4x4 v6 model toyota pickup. Initially transmission looks pretty much the same except for the transfer case and cover underneath the shifter has 4 bolts to the transmission as opposed to a 6 bolt cover plate under the shifter of my w56. Is it possible to make this swap? Can i bolt up my gear driven transfer case to the v6 (r150 i think) tranny?
|
|
|
Re: tranny swap
[Re: mqm]
#870645
02/22/08 03:41 AM
|
Joined: Jan 2000
Posts: 12,153
Web Wheeler
|
Would likely require an R151 bellhousing (22RE turbo tranny) and an adapter plate for the t-case.
|
|
|
Re: tranny swap
[Re: 4Crawler]
#870646
02/22/08 04:47 PM
|
Joined: Apr 2007
Posts: 76
OP
Getting the Wheeling Fever
|
Is there a difference between the sline shafts of the w56, r151f and the r150??
|
|
|
Re: tranny swap
[Re: mqm]
#870647
03/01/08 03:22 AM
|
Joined: Apr 2007
Posts: 76
OP
Getting the Wheeling Fever
|
found a r151 tranny out of a turbo 22re 4x4. Will i have to modify anything to make this fit in place of my w56?
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.011s Queries: 15 (0.009s) Memory: 0.5996 MB (Peak: 0.6552 MB) Data Comp: Off Server Time: 2026-07-15 17:43:57 UTCValid HTML 5 and Valid CSS 
