Moving front axle forward

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Moving front axle forward [Re: Adam F] #871278 02/25/08 07:07 AM

Joined: Aug 2004

Posts: 202

Oregon, Albany

rednekbean Offline

Wheeler

Mine is 1.5" forward, but i have built them at 2" and had no problems. Shackle angle was steeper ofcourse but with longer shackles it wasn't to big of a diffrence. Keep in mind most of the front lift springs have the center pin 1.5" forward already.

92' Pick-up, SAS, gears to make her crawl, 37's , bullet proof motor, and alot of time invested.
06 CRF450R one mean roost flinging machine

Entire Thread
Subject	Posted By	Posted
Moving front axle forward	Adam F	02/25/08 04:08 AM
Re: Moving front axle forward	4Crawler	02/25/08 04:47 AM
Re: Moving front axle forward	rednekbean	02/25/08 07:07 AM
Re: Moving front axle forward	dcg9381	02/26/08 10:18 PM
Re: Moving front axle forward	Adam F	02/27/08 11:15 PM
Re: Moving front axle forward	95mini	02/28/08 05:00 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.077s Queries: 16 (3.358s) Memory: 0.6031 MB (Peak: 0.6360 MB) Data Comp: Off Server Time: 2026-05-26 05:56:45 UTC
Valid HTML 5 and Valid CSS