valvetrain specs newbie needs help

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

valvetrain specs newbie needs help #872138 02/28/08 08:45 PM

Joined: Feb 2008

Posts: 7

Adelphi, MD

LemeholdatRaider Offline

Need a Spot

hi guys,
i recently purchased an '87 raider 2.6 w/AT it had the head replaced then sat for a year before i bought the truck. the valves seem to be tapping a little. i was wondering if anyone had the specs on adjusting the valves and will factory settings be the same for the aftermarket head, i believe its a clearwater. i would like to adjust them while i have it apart.
any links or clues would be a great help.

Jack

'87 Raider 2.6 auto 30x10.50's 800w of pioneer power

Entire Thread
Subject	Posted By	Posted
valvetrain specs newbie needs help	LemeholdatRaider	02/28/08 08:45 PM
Re: valvetrain specs newbie needs help	fasteddy	02/28/08 11:05 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.501s Queries: 15 (3.499s) Memory: 0.5960 MB (Peak: 0.6290 MB) Data Comp: Off Server Time: 2026-06-09 09:55:09 UTC
Valid HTML 5 and Valid CSS