valvetrain specs newbie needs help

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: valvetrain specs newbie needs help [Re: LemeholdatRaider] #872139 02/28/08 11:05 PM

Joined: Jan 2001

Posts: 13,649

Helen , GA

fasteddy

Web Wheeler

First, it may not have adjustable valves. Take the vavle cover off, and see if there are adjusting screws on the rocker arms. If not, you need to bleed the lifters, then replace any that won't stay bled of air bubbles. If it has adjusters, the specs are .010" on exhaust, and .006 on the intakes.

Not responsible for advice not taken...

Entire Thread
Subject	Posted By	Posted
valvetrain specs newbie needs help	LemeholdatRaider	02/28/08 08:45 PM
Re: valvetrain specs newbie needs help	fasteddy	02/28/08 11:05 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.511s Queries: 16 (3.509s) Memory: 0.5952 MB (Peak: 0.6282 MB) Data Comp: Off Server Time: 2026-06-14 20:04:37 UTC
Valid HTML 5 and Valid CSS