Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: bending a pitman arm [Re: 95mini] #872705 03/03/08 04:59 AM
Joined: Dec 2005
Posts: 44
9
95mini Offline OP
Getting the Wheeling Fever
some pics with 33's, it really needs some 35s now
[Linked Image]
steering box mounts...still need trimmed and welded
[Linked Image]
[Linked Image]
clearance... This is as close as it gets with the bump stops now. Most likely I'll raise em some. that strap on the leaf needs cut down for sure.
[Linked Image]
poser pics
[Linked Image]
[Linked Image]
[Linked Image]

Re: bending a pitman arm [Re: 95mini] #872706 03/03/08 05:37 AM
Joined: Nov 1999
Posts: 1,049
toyrunner Offline
Body Damage is Cool
Looks like what I had when I straightened my arm. [Linked Image]


1985 SR5 4Runner
eLocked with Carter Lock
4.7:1 single case
Davez Offroad twin stick
Page 2 of 2 1 2

Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.007s Queries: 15 (0.005s) Memory: 0.5959 MB (Peak: 0.6455 MB) Data Comp: Off Server Time: 2026-10-24 07:32:14 UTC
Valid HTML 5 and Valid CSS