bending a pitman arm

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: bending a pitman arm [Re: 95mini] #872702 03/02/08 02:53 AM

Joined: Dec 2000

Posts: 882

Black Hills of South Dakota

missouriman Offline

Rock Warrior

you asked, don't be defensive.
I cut the core to where there was just a bit left there.
it has been ok. of course I cut it up to add hydro assist.

wife's, stock
[Linked Image]

mine

Entire Thread
Subject	Posted By	Posted
bending a pitman arm	95mini	03/01/08 08:01 PM
Re: bending a pitman arm	Adam F	03/01/08 08:13 PM
Re: bending a pitman arm	95mini	03/01/08 08:18 PM
Re: bending a pitman arm	Scerb	03/01/08 09:47 PM
Re: bending a pitman arm	Adam F	03/02/08 12:45 AM
Re: bending a pitman arm	missouriman	03/02/08 01:12 AM
Re: bending a pitman arm	95mini	03/02/08 02:33 AM
Re: bending a pitman arm	missouriman	03/02/08 02:53 AM
Re: bending a pitman arm	Adam F	03/02/08 03:31 AM
Re: bending a pitman arm	toyrunner	03/02/08 03:53 AM
Re: bending a pitman arm	95mini	03/03/08 04:59 AM
Re: bending a pitman arm	toyrunner	03/03/08 05:37 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.330s Queries: 16 (4.327s) Memory: 0.6169 MB (Peak: 0.6499 MB) Data Comp: Off Server Time: 2026-10-28 04:25:39 UTC
Valid HTML 5 and Valid CSS