Exhaust manifold/ head removal.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Exhaust manifold/ head removal. #872884 03/02/08 08:43 PM

Joined: May 2006

Posts: 709

89montero

Rock Warrior

Is there anyway to remove the heads without removing the manifolds? I easily removed the nuts holding the manifold to the head but all the other nuts/bolts holding the manifolds to the rest of the exhaust are frozen solid. I tried prying the manifold away from the heads but couldn't get it far enough away.

Any ideas?

1989 Montero 4dr V6 3.0l

Entire Thread
Subject	Posted By	Posted
Exhaust manifold/ head removal.	89montero	03/02/08 08:43 PM
Re: Exhaust manifold/ head removal.	87Montero	03/02/08 09:18 PM
Re: Exhaust manifold/ head removal.	FrankR	03/02/08 09:25 PM
Re: Exhaust manifold/ head removal.	89montero	03/02/08 11:03 PM
Re: Exhaust manifold/ head removal.	FrankR	03/03/08 12:09 AM
Re: Exhaust manifold/ head removal.	HondaGuy	03/03/08 12:23 AM
Re: Exhaust manifold/ head removal.	89montero	03/03/08 01:20 AM
Re: Exhaust manifold/ head removal.	sparkem	03/03/08 02:25 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.482s Queries: 15 (3.480s) Memory: 0.6058 MB (Peak: 0.6388 MB) Data Comp: Off Server Time: 2026-06-03 11:54:07 UTC
Valid HTML 5 and Valid CSS