Exhaust manifold/ head removal.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Exhaust manifold/ head removal. [Re: FrankR] #872887 03/02/08 11:03 PM

Joined: May 2006

Posts: 709

89montero

Rock Warrior

Quote

If you disassemble the Y pipe connection at the converter and at the transmission pan area clamp, the exhaust manifolds should rotate to the side far enough to clear the head studs.

Frank

Those are frozen too.

1989 Montero 4dr V6 3.0l

Entire Thread
Subject	Posted By	Posted
Exhaust manifold/ head removal.	89montero	03/02/08 08:43 PM
Re: Exhaust manifold/ head removal.	87Montero	03/02/08 09:18 PM
Re: Exhaust manifold/ head removal.	FrankR	03/02/08 09:25 PM
Re: Exhaust manifold/ head removal.	89montero	03/02/08 11:03 PM
Re: Exhaust manifold/ head removal.	FrankR	03/03/08 12:09 AM
Re: Exhaust manifold/ head removal.	HondaGuy	03/03/08 12:23 AM
Re: Exhaust manifold/ head removal.	89montero	03/03/08 01:20 AM
Re: Exhaust manifold/ head removal.	sparkem	03/03/08 02:25 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.096s Queries: 16 (3.525s) Memory: 0.6079 MB (Peak: 0.6409 MB) Data Comp: Off Server Time: 2026-06-04 15:05:12 UTC
Valid HTML 5 and Valid CSS