Exhaust manifold/ head removal.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Exhaust manifold/ head removal. [Re: FrankR] #872889 03/03/08 12:23 AM

Joined: Mar 2008

Posts: 9

HondaGuy

Need a Spot

Interestingly I just pulled the heads off my 91 without pulling the manifolds. Once the head bolts are loose, you can lift the heads off of the dowel pins and then just slide them towards the center of the engine right off of the manifolds. If you assemble using same method, take extra care not to damage the head gaskets.

Entire Thread
Subject	Posted By	Posted
Exhaust manifold/ head removal.	89montero	03/02/08 08:43 PM
Re: Exhaust manifold/ head removal.	87Montero	03/02/08 09:18 PM
Re: Exhaust manifold/ head removal.	FrankR	03/02/08 09:25 PM
Re: Exhaust manifold/ head removal.	89montero	03/02/08 11:03 PM
Re: Exhaust manifold/ head removal.	FrankR	03/03/08 12:09 AM
Re: Exhaust manifold/ head removal.	HondaGuy	03/03/08 12:23 AM
Re: Exhaust manifold/ head removal.	89montero	03/03/08 01:20 AM
Re: Exhaust manifold/ head removal.	sparkem	03/03/08 02:25 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.544s Queries: 16 (3.541s) Memory: 0.6058 MB (Peak: 0.6388 MB) Data Comp: Off Server Time: 2026-06-05 23:18:01 UTC
Valid HTML 5 and Valid CSS