Pondering front end maintenance

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Pondering front end maintenance [Re: fasteddy] #874477 03/11/08 03:06 AM

Joined: Dec 2000

Posts: 6,896

Ponchatoula, LA

sparkem

Trail Leader

To check wheel bearing play, shouldnt you push and pull the 12 and 6 o'clock position with the wheel off the ground? On mine, the pitman and idler arm have some play, it would be hard to tell if the wheel bearing had slop.

I just want to tell you both good luck, and we're all counting on you.

Entire Thread
Subject	Posted By	Posted
Pondering front end maintenance	Liquid_force	03/10/08 06:09 PM
Re: Pondering front end maintenance	fasteddy	03/11/08 02:50 AM
Re: Pondering front end maintenance	sparkem	03/11/08 03:06 AM
Re: Pondering front end maintenance	fasteddy	03/11/08 04:01 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.892s Queries: 16 (3.889s) Memory: 0.5978 MB (Peak: 0.6308 MB) Data Comp: Off Server Time: 2026-06-24 05:06:25 UTC
Valid HTML 5 and Valid CSS