oil/ air separator-- turbo conversion

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

oil/ air separator-- turbo conversion #874629 03/11/08 12:09 PM

Joined: Apr 2007

Posts: 220

M'ville, Georgia

whitelespaul Offline

Wheeler

I'm going with a 1G MAS airbox that does not have the starion's oil/ air separator. Do I need one? Where should the oil drain to? Do I need to add a barb to drain it to the pan and if so where on the pan is the best location?

83 mitsu flat bed 2.6l weber, 88 auto tranny, 2" body lift, 4.625 LSD, 235/85-16E mudders (33 x 9.50).

Entire Thread
Subject	Posted By	Posted
oil/ air separator-- turbo conversion	whitelespaul	03/11/08 12:09 PM
Re: oil/ air separator-- turbo conversion	ForcedAir_Montero	03/11/08 03:36 PM
Re: oil/ air separator-- turbo conversion	fasteddy	03/12/08 02:11 AM
Re: oil/ air separator-- turbo conversion	whitelespaul	03/13/08 04:09 PM
Re: oil/ air separator-- turbo conversion	fasteddy	03/13/08 04:48 PM
Re: oil/ air separator-- turbo conversion	Kevin C	03/14/08 02:30 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.485s Queries: 15 (3.482s) Memory: 0.6013 MB (Peak: 0.6342 MB) Data Comp: Off Server Time: 2026-06-15 02:53:23 UTC
Valid HTML 5 and Valid CSS