|
|
|
|
 Re: rotor removal
[Re: huey]
#875126
03/15/08 12:07 AM
|
Joined: Apr 2000
Posts: 4,282
Roll Me Over
|
just a tip.
just in case you are driving down a lonely freeway on thanksgiving day and suddenly the rotor comes loose from it's mount and you can find the 2 bolts, you can substitute the transmission/transfer case crossmember mounting bolt AS EN EMERGENCY fix.
DO NOT ask me why i know this...
leo d. 90 4runner, v6, auto, WCOR CitB kit, marlin duals, arb rear, tt front 4.88, blah, blah, blah... Pres. of TEAM IFS! and GETTING OFF 4WD Club member
|
|
 Re: rotor removal
[Re: ldivinag]
#875127
03/15/08 02:27 AM
|
Joined: Oct 2005
Posts: 30
OP
Getting the Wheeling Fever
|
Once again thanks for all the info. SUCCESS AT LAST. My major stumbling block was those cone washers. The rest was a snap. So therefore I can calebrate " Another victory of man over machine". Thanks again and remember A good doctor can cure the sick but a good machanic can Raise The Dead.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5935 MB (Peak: 0.6418 MB) Data Comp: Off Server Time: 2026-06-07 09:22:39 UTCValid HTML 5 and Valid CSS 
