rotor removal

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: rotor removal [Re: Adam F] #875122 03/14/08 05:47 PM

Joined: Oct 2005

Posts: 30

huey

Getting the Wheeling Fever

OK guys, great help. What I guess I want to know is , Where it says to use a Brass Bar ( punch) to hemove the tapered washers, Does that mean to drive the studs back into the hub like punchiing them through? I mean this is my stuck point ( Getting those washers loose)

Entire Thread
Subject	Posted By	Posted
rotor removal	huey	03/14/08 02:43 AM
Re: rotor removal	4Crawler	03/14/08 04:38 AM
Re: rotor removal	huey	03/14/08 02:49 PM
Re: rotor removal	Bogo	03/14/08 03:48 PM
Re: rotor removal	toyomorph	03/14/08 03:52 PM
Re: rotor removal	Adam F	03/14/08 04:56 PM
Re: rotor removal	huey	03/14/08 05:47 PM
Re: rotor removal	Adam F	03/14/08 06:17 PM
Re: rotor removal	4Crawler	03/14/08 07:41 PM
Re: rotor removal	toyomorph	03/14/08 07:49 PM
Re: rotor removal	ldivinag	03/15/08 12:07 AM
Re: rotor removal	huey	03/15/08 02:27 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.537s Queries: 16 (3.535s) Memory: 0.6160 MB (Peak: 0.6490 MB) Data Comp: Off Server Time: 2026-06-15 13:50:40 UTC
Valid HTML 5 and Valid CSS