rotor removal

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: rotor removal [Re: 4Crawler] #875125 03/14/08 07:49 PM

Joined: Dec 2003

Posts: 201

toyomorph

Wheeler

Roger, that's really good information. Especially like the part about not hitting the hub body too hard. On my truck the previous owner or mechanic hit the hub body so hard with a hammer that there are now permanent dents above each stud.

Thanks

canyon country explorer
1993 4x PUP

Entire Thread
Subject	Posted By	Posted
rotor removal	huey	03/14/08 02:43 AM
Re: rotor removal	4Crawler	03/14/08 04:38 AM
Re: rotor removal	huey	03/14/08 02:49 PM
Re: rotor removal	Bogo	03/14/08 03:48 PM
Re: rotor removal	toyomorph	03/14/08 03:52 PM
Re: rotor removal	Adam F	03/14/08 04:56 PM
Re: rotor removal	huey	03/14/08 05:47 PM
Re: rotor removal	Adam F	03/14/08 06:17 PM
Re: rotor removal	4Crawler	03/14/08 07:41 PM
Re: rotor removal	toyomorph	03/14/08 07:49 PM
Re: rotor removal	ldivinag	03/15/08 12:07 AM
Re: rotor removal	huey	03/15/08 02:27 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.507s Queries: 16 (3.505s) Memory: 0.6146 MB (Peak: 0.6476 MB) Data Comp: Off Server Time: 2026-06-15 06:13:29 UTC
Valid HTML 5 and Valid CSS