master cylinder swap

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

master cylinder swap #875254 03/15/08 04:44 AM

Joined: Sep 2003

Posts: 97

Sweet home Alabama

Yaker

Getting the Wheeling Fever

I bought a new v6 master cylinder today to swap into my 83 and the fluid res. dosen't swap. I remeber reading about a direct swap.

Is this just for junk yard swaps, or is there one where the res. will swap

No one sells just the res.

Work smart not hard!

83 SR5 Pickup, 4" home brew lift, 36 inch TSLs ,locked front and rear, 4.7 t-case gears, 5.71 diff. gears, cross over high steer, 8k warn, custom bumper and flat bed, and huge plans.

Entire Thread
Subject	Posted By	Posted
master cylinder swap	Yaker	03/15/08 04:44 AM
Re: master cylinder swap	Bogo	03/16/08 02:04 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.416s Queries: 15 (3.414s) Memory: 0.5941 MB (Peak: 0.6271 MB) Data Comp: Off Server Time: 2026-05-30 13:41:47 UTC
Valid HTML 5 and Valid CSS