custom lift blocks

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

custom lift blocks #875262 03/15/08 05:40 AM

Joined: Oct 2007

Posts: 61

trashcanman Offline

Getting the Wheeling Fever

Im looking for about 3/4 inch rear lift blocks for my 92 stock toyota 4x4. but im not sure which to get. Im on the 4crawler page. should I get the custom width spacer or the 2" width spacer(my springs are 3 inches wide)? pressed in locating pin or no? do I need new longer u-bolts? anything else i need to install them?

Entire Thread
Subject	Posted By	Posted
custom lift blocks	trashcanman	03/15/08 05:40 AM
Re: custom lift blocks	4Crawler	03/15/08 05:38 PM
Re: custom lift blocks	ChrisH	03/15/08 06:24 PM
Re: custom lift blocks	trashcanman	03/15/08 07:02 PM
Re: custom lift blocks	4Crawler	03/15/08 07:27 PM
Re: custom lift blocks	trashcanman	03/18/08 07:58 PM
Re: custom lift blocks	4Crawler	03/18/08 08:53 PM
Re: custom lift blocks	trashcanman	03/18/08 09:10 PM
Re: custom lift blocks	4Crawler	03/18/08 09:22 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.493s Queries: 15 (3.491s) Memory: 0.6100 MB (Peak: 0.6430 MB) Data Comp: Off Server Time: 2026-06-14 06:17:24 UTC
Valid HTML 5 and Valid CSS