custom lift blocks

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: custom lift blocks [Re: trashcanman] #875266 03/15/08 07:27 PM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Generally you want the block (or shim) to match the length of the spring perch:
http://www.4crawler.com/4x4/ForSale/Shims.shtml#FAQ2

4.75" is typical for the rear axle.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
custom lift blocks	trashcanman	03/15/08 05:40 AM
Re: custom lift blocks	4Crawler	03/15/08 05:38 PM
Re: custom lift blocks	ChrisH	03/15/08 06:24 PM
Re: custom lift blocks	trashcanman	03/15/08 07:02 PM
Re: custom lift blocks	4Crawler	03/15/08 07:27 PM
Re: custom lift blocks	trashcanman	03/18/08 07:58 PM
Re: custom lift blocks	4Crawler	03/18/08 08:53 PM
Re: custom lift blocks	trashcanman	03/18/08 09:10 PM
Re: custom lift blocks	4Crawler	03/18/08 09:22 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.465s Queries: 16 (3.462s) Memory: 0.6121 MB (Peak: 0.6451 MB) Data Comp: Off Server Time: 2026-06-06 21:48:52 UTC
Valid HTML 5 and Valid CSS