See if you have a local spring shop, they can bend up a set for you. Or try one of the big 4WD parts places and order a set. Or that is a good time to pop for a u-bolt flip kit, putting the u-bolt threads up on top of the axle, away from the rocks.

Or go with a 1/2" block, can't do those with a pressed in center pin, but with a longer center bolt, you can bolt them to the springs and call it good.

Last edited by 4Crawler; 03/18/08 08:55 PM.
r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code