Quote
Ok got it out, anyone have any idea how to go about fixing this tranny x-member issue? # of the 4 bolts broke on the pass side... heads snapped off so the studs are still in the holes. I really hate to weld it on there <img src="/forums/images/graemlins/frown.gif" alt="" />


Bad idea.

Drill them out. They are easy to get to.

Center punch them directly in the center, and start drilling. Use a small bit, and work your way up to a big one.

OR If you have a good welder, weld a head onto them.

87 Raider 4D56td v5MT1
31's..Basically Stock