Building the thing that should not be. <img src="/forums/images/graemlins/scared.gif" alt="" />
It started with the 88 Mighty Max that I aquired late last year. Originally I intended to make a fun driver out of it, and even adapted a KM148 tailhousing to mate to an Active Trac t-case. For some reason, I let my twisted imagination roam and decided to make an all-out wheeler with it instead.
A month or two ago, I picked up a Montero Sport chassis w/ a 3.0 and V5MT1 transmission. Some quick measurements made me realize that the Montero Sports and pickups really do share many features. The first and second pair of cab mounts are located in exactly the same spots as the Mighty Maxes.
Today, with help from DougB and my brother (thanks guys! <img src="/forums/images/graemlins/cheers.gif" alt="" />), we transfered the cab from the Mighty Max over to the MS frame. I removed the third pair of cab mounts and still need to relocate them to the proper position roughly 3" rearward. It's amazing how well the cab fit the chassis, even the fuel tank was notched just right to perfectly clear the MacroCab! <img src="/forums/images/graemlins/cyclops.gif" alt="" />
I decided to use the MS chassis because it is in better shape, has the V5MT1, and has a much better wheel base.
The dual t-cases in the SR have really spoiled me, however, so I've been working on a dual transfer case setup for the V5MT1. It has proved to be a real challenge, and it's not done yet. I am using the original t-case as the doubler which has required a custom shaft as well as an adapter plate. I'm roughly half-done with the adapter plate and the shaft is completed. With this setup, the transmission and doubler t-case shifters will be in the original locations. I will need to add another shifter for the rear t-case.
I am making the adapter plate with a clocking ring that will mate to the Jeep round six bolt pattern. I plan to use the rear NP231 that is currently in my SR for the rear case on the Max. I still need to modify the doubler shifter rail and get it functional.
I also plan to ditch the IFS and SAS w/ a HPD44. I've been trying to aquire a parts SR and if it works out, I'll try to use the big rear axle w/4.90 gears and possibly use the 3.5 as well.