Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 5 1 2 3 4 5
What I've been up to... #875679 03/17/08 12:33 AM
Joined: Apr 2002
Posts: 3,622
NathanC Offline OP
Roll Me Over
Building the thing that should not be. <img src="/forums/images/graemlins/scared.gif" alt="" />

It started with the 88 Mighty Max that I aquired late last year. Originally I intended to make a fun driver out of it, and even adapted a KM148 tailhousing to mate to an Active Trac t-case. For some reason, I let my twisted imagination roam and decided to make an all-out wheeler with it instead.

A month or two ago, I picked up a Montero Sport chassis w/ a 3.0 and V5MT1 transmission. Some quick measurements made me realize that the Montero Sports and pickups really do share many features. The first and second pair of cab mounts are located in exactly the same spots as the Mighty Maxes.

Today, with help from DougB and my brother (thanks guys! <img src="/forums/images/graemlins/cheers.gif" alt="" />), we transfered the cab from the Mighty Max over to the MS frame. I removed the third pair of cab mounts and still need to relocate them to the proper position roughly 3" rearward. It's amazing how well the cab fit the chassis, even the fuel tank was notched just right to perfectly clear the MacroCab! <img src="/forums/images/graemlins/cyclops.gif" alt="" />

I decided to use the MS chassis because it is in better shape, has the V5MT1, and has a much better wheel base.

The dual t-cases in the SR have really spoiled me, however, so I've been working on a dual transfer case setup for the V5MT1. It has proved to be a real challenge, and it's not done yet. I am using the original t-case as the doubler which has required a custom shaft as well as an adapter plate. I'm roughly half-done with the adapter plate and the shaft is completed. With this setup, the transmission and doubler t-case shifters will be in the original locations. I will need to add another shifter for the rear t-case.

I am making the adapter plate with a clocking ring that will mate to the Jeep round six bolt pattern. I plan to use the rear NP231 that is currently in my SR for the rear case on the Max. I still need to modify the doubler shifter rail and get it functional.

I also plan to ditch the IFS and SAS w/ a HPD44. I've been trying to aquire a parts SR and if it works out, I'll try to use the big rear axle w/4.90 gears and possibly use the 3.5 as well.


'06 Dakota QC 4.7 6sp 4x4
'88 Mighty Max
'77 KZ1000 fun old bike
Re: What I've been up to... [Re: NathanC] #875680 03/17/08 01:36 AM
Joined: Dec 2000
Posts: 6,896
sparkem Offline
Trail Leader
***
Sounds awesome, we demand pics. What are you going to do with the bed area? Flat bed?

[Linked Image]

87 (I think) 2wd Toyota PU on 93 4Runner chassis. The gauges worked, the front body mounts fit perfect, the rear needed to be moved. Awesome truck, got flooded and someone stole the rims and tires.


Last edited by sparkem; 03/17/08 01:47 AM.

I just want to tell you both good luck, and we're all counting on you.
Re: What I've been up to... [Re: sparkem] #875681 03/17/08 03:58 AM
Joined: Apr 2002
Posts: 3,622
NathanC Offline OP
Roll Me Over
Not yet sure what I'm doing with the bed. I'm focusing on other areas of the truck to give myself time to think about it. <img src="/forums/images/graemlins/wink.gif" alt="" />

I'll try to get some pics. I didn't want to take any today because the garage was a mess from the work I've done (and haven't done <img src="/forums/images/graemlins/baby.gif" alt="" /> ) lately.


'06 Dakota QC 4.7 6sp 4x4
'88 Mighty Max
'77 KZ1000 fun old bike
Re: What I've been up to... [Re: NathanC] #875682 03/17/08 07:35 AM
Joined: Jul 2003
Posts: 850
ES_97Sport Offline
Rock Warrior
*****
SWEET!!!! I agree with sparkem. Must post pics!!!

I knew about the - more than passing - similarities from the Sport and Max. Figured that out within a year of owning my Sport.

My only question is WHY would you want to use the stock t-case?!? Not that it's a POS or anything, but wouldn't it be easier - not to mention cheaper - to use twin 231s? Even at stock 2.72*2 the gearing is tons better - especially relevant if you're building a crawler out of it.

Unfortunately, I don't have a CAD drawing of the adapter we're working on. But so far it consists of two T6 3/4 plates on either end of a T6 5" long 6"x.5" section of pipe with a 1" plate on top to mount the transmission shifter using the stock mount plate. The whole adapter has turned out to be a LOT less complicated than I'd previously thought it'd be.

Still this is totally cool!!!! Can't wait for more details!

Edward


'97 Montero Sport LS 5-Speed 3.5L conversion
SAS Dana 44s & ARBs, 35" Yoko Geolandar M/Ts
NP231 B4R doubler/Terra Low231/RP 5.38 229:1
'99 Montero Sport Limited 4WD SAS 3-link project
'03 Montero Sport Limited AWD
'97 Montero Sport LS 5-Speed 4WD
Re: What I've been up to... [Re: ES_97Sport] #875683 03/17/08 11:16 AM
Joined: Apr 2002
Posts: 3,622
NathanC Offline OP
Roll Me Over
Quote
My only question is WHY would you want to use the stock t-case?!? Not that it's a POS or anything, but wouldn't it be easier - not to mention cheaper - to use twin 231s? Even at stock 2.72*2 the gearing is tons better - especially relevant if you're building a crawler out of it.


I'm just using it for the doubler. It won't be as nice as dual NP231s as far as the 2.72 x 2.72 reduction, but, it will still be 1.9 x 2.72 and that's better than a kick in the <img src="/forums/images/graemlins/butwiggle.gif" alt="" />.

Using the Mitsu case as the doubler also keeps the tranny shifter in it's original configuration, which I felt was a plus.


'06 Dakota QC 4.7 6sp 4x4
'88 Mighty Max
'77 KZ1000 fun old bike
Re: What I've been up to... [Re: NathanC] #875684 03/17/08 05:57 PM
Joined: Jan 2002
Posts: 6,134
TOASTY Offline
Trail Leader
*****
i always wanted to buy a cheap '00+ sport and import a strada l200 body for it, i think it would be awesome to have a pickup with coils in the rear. i love that bodystyle[Linked Image]


1999 Montero SAS'd on Kings and stuff

1998 Montero trying to get a V8 Swapped
Re: What I've been up to...(pics added) [Re: NathanC] #875685 03/17/08 11:28 PM
Joined: Apr 2002
Posts: 3,622
NathanC Offline OP
Roll Me Over
Ignore the 2x4's. They are there for lifting points. <img src="/forums/images/graemlins/notooth.gif" alt="" />
[Linked Image]
[Linked Image]


'06 Dakota QC 4.7 6sp 4x4
'88 Mighty Max
'77 KZ1000 fun old bike
Re: What I've been up to...(pics added) [Re: NathanC] #875686 03/18/08 12:20 AM
Joined: Dec 2000
Posts: 6,896
sparkem Offline
Trail Leader
***
My bro has a rolled 95SR, Hmmmm.


I just want to tell you both good luck, and we're all counting on you.
Re: What I've been up to...(pics added) [Re: NathanC] #875687 03/18/08 01:47 AM
Joined: Sep 2006
Posts: 2,712
OldColt Offline
Roll Me Over
*****
Looking nice Nathan <img src="/forums/images/graemlins/cheers.gif" alt="" />
I cant wait till I can get going on mine, another month our snow will be melting away and I can get my parts together.


Cheers, Charlie
If It ain't broke, Modify it!
87 Montero turbo Converted back in Spring1989
95 Montero SR 3.8 DOHC Only one?
93 Pajero 3 door 6G75 Mivec with paddle shifted 5 speed
Then a Gen2 SR with full coil independent suspension.
Re: What I've been up to...(pics added) [Re: sparkem] #875688 03/18/08 02:54 AM
Joined: Apr 2002
Posts: 3,622
NathanC Offline OP
Roll Me Over
Quote
My bro has a rolled 95SR, Hmmmm.

Realize that the Montero has the engine placed further back than the MS and trucks. It could certainly be made to work, however. <img src="/forums/images/graemlins/kewl.gif" alt="" />

Thanks Charlie, I'm sure yours will be quite the build. <img src="/forums/images/graemlins/kewl.gif" alt="" />


'06 Dakota QC 4.7 6sp 4x4
'88 Mighty Max
'77 KZ1000 fun old bike
Page 1 of 5 1 2 3 4 5







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.012s Queries: 15 (0.009s) Memory: 0.6452 MB (Peak: 0.7723 MB) Data Comp: Off Server Time: 2026-11-16 10:28:17 UTC
Valid HTML 5 and Valid CSS