SWEET!!!! I agree with sparkem. Must post pics!!!

I knew about the - more than passing - similarities from the Sport and Max. Figured that out within a year of owning my Sport.

My only question is WHY would you want to use the stock t-case?!? Not that it's a POS or anything, but wouldn't it be easier - not to mention cheaper - to use twin 231s? Even at stock 2.72*2 the gearing is tons better - especially relevant if you're building a crawler out of it.

Unfortunately, I don't have a CAD drawing of the adapter we're working on. But so far it consists of two T6 3/4 plates on either end of a T6 5" long 6"x.5" section of pipe with a 1" plate on top to mount the transmission shifter using the stock mount plate. The whole adapter has turned out to be a LOT less complicated than I'd previously thought it'd be.

Still this is totally cool!!!! Can't wait for more details!

Edward


'97 Montero Sport LS 5-Speed 3.5L conversion
SAS Dana 44s & ARBs, 35" Yoko Geolandar M/Ts
NP231 B4R doubler/Terra Low231/RP 5.38 229:1
'99 Montero Sport Limited 4WD SAS 3-link project
'03 Montero Sport Limited AWD
'97 Montero Sport LS 5-Speed 4WD