Quote
Quote
My only question is WHY would you want to use the stock t-case?!? Not that it's a POS or anything, but wouldn't it be easier - not to mention cheaper - to use twin 231s? Even at stock 2.72*2 the gearing is tons better - especially relevant if you're building a crawler out of it.


I'm just using it for the doubler. It won't be as nice as dual NP231s as far as the 2.72 x 2.72 reduction, but, it will still be 1.9 x 2.72 and that's better than a kick in the <img src="/forums/images/graemlins/butwiggle.gif" alt="" />.

Using the Mitsu case as the doubler also keeps the tranny shifter in it's original configuration, which I felt was a plus.


DANG Nathan!!!! THAT is SHARP!!! Jealous!!! I take back all the bad things I've ever said about you! You DO rock! <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/kewl.gif" alt="" /> <img src="/forums/images/graemlins/kewl.gif" alt="" />

Hmm. Makes sense. Keep us posted on how that goes with the stock t-case. Yea, can't argue with that - 1.92x2.72 IS DEFINITELY better then a kick in the <img src="/forums/images/graemlins/butwiggle.gif" alt="" />! <img src="/forums/images/graemlins/smile.gif" alt="" />

We're done to the adapter shaft. Need to find a length of 4340 or some such now. Still no pics. Forgot the dang camera this morning.

Edward


'97 Montero Sport LS 5-Speed 3.5L conversion
SAS Dana 44s & ARBs, 35" Yoko Geolandar M/Ts
NP231 B4R doubler/Terra Low231/RP 5.38 229:1
'99 Montero Sport Limited 4WD SAS 3-link project
'03 Montero Sport Limited AWD
'97 Montero Sport LS 5-Speed 4WD