Steering Pump Bracket Gen I

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Steering Pump Bracket Gen I [Re: 85Montero] #876929 03/24/08 01:19 AM

Joined: Jan 2001

Posts: 13,649

Helen , GA

fasteddy

Web Wheeler

Do you have balance shafts? If not, get ready to replace the new one, too. Make sure the back side bracket bolt is tight as well.

Not responsible for advice not taken...

Entire Thread
Subject	Posted By	Posted
Steering Pump Bracket Gen I	85Montero	03/23/08 05:48 PM
Re: Steering Pump Bracket Gen I	fasteddy	03/24/08 01:19 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.516s Queries: 16 (3.514s) Memory: 0.5943 MB (Peak: 0.6273 MB) Data Comp: Off Server Time: 2026-06-08 03:49:05 UTC
Valid HTML 5 and Valid CSS