Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Starter question..... #877151 03/25/08 03:19 AM
Joined: Jul 2004
Posts: 31
D
duffin_p Offline OP
Getting the Wheeling Fever
What is the trick to removing the power cable to the starter? I'm replacing the whole positive power cable due to corrosion problems and I can't see how to get to the starter connection - Do I need to remove the starter to get to it? if so, how do I do it? its a '96 rodeo BTW...
Thanks for your help. (I have a Haynes manual, but it wasn't very helpful)


'96 rodeo, 3" lift with both calmini and DOR parts, 265/75/r16's on Eagle alloys, K&N drop-in filter and flowmaster exhaust, superwinch hubs, TJM Bullbar, and a custom (home-made) rear bumper, and still working on it...
Re: Starter question..... [Re: duffin_p] #877152 03/27/08 06:03 PM
Joined: Sep 2005
Posts: 416
Gizzy42 Offline
Mudrunner
Not sure if its the same on the '96 (different body design) but on mine I bent part of the inner fender out so I could get in between the body and frame. Was the easiest way for me.


--Dave

1999 Rodeo LS 3.2 4x4 5 Speed
32x11.50-15 BFG T/A KO on US Wheel 94 series
3" Lift - Rancho 9000x
Rear No-Slip Locker
Flowmaster 50 series SUV 2.25"

There is a very fine line between "hobby" and "mental illness." - Dave Barry







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.007s Queries: 15 (0.004s) Memory: 0.5846 MB (Peak: 0.6327 MB) Data Comp: Off Server Time: 2026-06-17 23:41:09 UTC
Valid HTML 5 and Valid CSS