Look at the lower front right part of your block and make sure you even have the holes drilled/threaded in the block to mount the compressor bracket. If you DON'T have 'em, you may need to rethink this, or go visit a machine shop and get it set up.

Go to the FSM sticky at the top of this section and look at either the '85 zip file or the '93 FSM to see what all components you need, along with R&R.

For the carb, you'll need the vacuum advance valve if there's not already one on your carb (but assuming original). Hardest thing to find will be the 3rd pulley you'll need for the belt.

Welcome!

http://www.walkablecommunities.org/

Democracy is two wolves and a lamb voting on what to have for dinner. Liberty is a well-armed lamb contesting the vote.

**ubi apis- ibi salus**