Low speed and in slow speed, or low speed as in Lo on the t-case side?

If the former, my tranny sometimes feels a little iffish when shifting. It was a rebuilt one from a donor that had a bad head. I bought it for parts in general and the rebuilt tranny in particular. In the end, though, not sure how good a job was done on the rebuild as adter a few thou miles I lost the big nut on the output shaft on the tranny. It's a known thing to watch on a rebuild and whoever did mine punted that ball.

If low means Lo and the latter above, then I must admit to my total lameness and say that I have yet to wheel it, and this is now heading into the third summer with them in. The only time they have seen is driving downt the street once in a while to feel "how low can you go?"

For all I know, the first time I really get to wheel it, the darn thing might explode on me. <img src="/forums/images/graemlins/lol.gif" alt="" />


Big Truck: 00, 3.5, Endeavor, 5-Spd drive line in hand!
Little Truck: 87, 2.6T I/C, MT, LSDs, Tonneau Top
Her Truck: 03, 3.8, 20th Anniv, 65k
Daughter's: 06 Eclipse, Keeping it Mitsu!
FSMs: MitsubishiLinks.com